WELCOME TO THERAMPMAN.NZ
Where New Zealand's best Custom Metal Access Ramps are made.
TOP QUALITY — NEW CUSTOM METAL ACCESS RAMPS — NZ-MADE
The Best Aluminium Custom Metal Access Ramps, curb/kerb road and driveway ramps,
garage and forklift ramps, gate slider ramps, portable caravan road ramps,
wheelchair access ramps, garage door ramps & more.
All designed, engineered and made in New Zealand (NZ)
Built for real Kiwi conditions • Practical • Strong • Compliant
Why I Started TheRampMan.NZ
There’s a simple reason I started making custom ramps differently.
I needed to understand access from the other side.
After developing Guillain-Barré Syndrome in 2024, I experienced first-hand how something as simple as getting through a doorway, over a lip or up a step can suddenly become a bloody big deal.
GBS is debilitating.
What frustrated me was seeing ramps that seemed designed to tick a box, rather than actually make life easier.
Too steep.
Too short.
Awkward transitions.
Hard edges.
Poor support.
Difficult for carers.
And often just plain ugly.
I kept thinking:
Surely we can do better than this?
So I started looking at ramps differently.
Not just as a piece of aluminium.
Not just a piece of rubber or plastic.
But as an access system.
How does the wheelchair approach it?
How does the person pushing handle the gradient?
What happens at the bottom?
Where does the load go?
What happens when it rains?
What happens when the surface isn’t flat?
What happens when the site is completely bloody awkward?
That’s where TheRampMan.NZ came from.
Built with care.
Fabricated with flair.
Installed with integrity.
Engineered with empathy.
Because I’ve actually been there.
And I understand that one little bump can make a massive difference.
So I wanted to flip the script.
Instead of asking:
“How do we make a ramp fit?”
I started asking:
“How do we make access easier?”
Eliminating one little bump can mean less jolting, less stress, less effort and more confidence.
It can make life safer.
It can make life easier.
It can make a difference to carers.
It can improve everyday Health & Safety.
And sometimes, it can be genuinely life-changing.
So if I can make getting in and out of somewhere a little easier, safer, and less frustrating for someone else…
That’s why I do it.
P.S. Then people started asking for ramps for forklifts, caravans, powerchairs, trucks, side-lifters, warehouses, garage dips, drainage channels, and all sorts of other weird and wonderful things.
— Clint
TheRampMan.NZ
Elevating your Entrance.
Let’s have some fun…
Custom Metal Access Ramps NZ
Explore Our Engineered Ramp Systems
Not every ramp solves the same problem.
From steep residential driveways and wheelchair access to forklifts, side-lifters and heavy construction vehicles, every TheRampMan.NZ system is purpose-built for a specific application.
Choose the solution that matches your challenge.
🟧 MOTHERTHUDDER™
Stop driveway scraping before it starts.
Engineered for cars, SUVs, utes, caravans and motorhomes tackling steep driveways, kerbs and drainage channels.
🟧 FCKIT™
Warehouse transition engineering.
Eliminate damaging impacts caused by warehouse lips, loading docks, concrete joints and forklift traffic with engineered industrial ramp systems.
🚛 SideLifter & Yard Drainage Channel Ramps
Built for serious loads.
Heavy-duty ramp systems engineered for side-lifters, forklifts, trucks and industrial drainage channels where strength, stability and durability matter.
👉 Explore SideLifter & Yard Drainage Channel Ramps
🏗️ LoadBeam™ Heavy Vehicle Access Systems
(Real-world images coming soon)
Temporary access. Permanent savings.
Custom-engineered reusable heavy vehicle access ramps designed to protect kerbs, channels and site entrances—often eliminating the need for costly temporary civil reconstruction.
Ideal for:
- Construction sites
- Concrete trucks
- Crane trucks
- Hiabs
- Civil contractors
- Infrastructure projects
👉 Discover LoadBeam™ Heavy Vehicle Access Systems
♿ Mobility Ramp Systems
Safe access for every stage of life.
Premium aluminium ramps designed for wheelchairs, walkers, mobility scooters, homes, schools, workplaces and public buildings.
👉 Explore Mobility Ramp Systems
🇳🇿 Proudly Kiwi Made
Every TheRampMan.NZ system is designed for New Zealand conditions and manufactured using premium aluminium, innovative hybrid recycled tyre technology and practical engineering that stands up to real-world use.
🚨 NEED A METAL ACCESS RAMP ASAP?
Yep — we can usually help.
But here’s the deal…
These aren’t off-the-shelf ramps pulled from a warehouse shelf.
They’re custom-built for your site, which means materials need to be sourced, cutting may need to be outsourced, and then there’s the folding, drilling, countersinking, fabrication, finishing, and custom fitting.
💥 Can we make one urgently? Absolutely.
But:
🔩 Urgent cutting/fabrication can cost more.
🛠️ Folding, drilling, welding, countersinking, or other custom work can add time.
📅 Most urgent custom jobs still need 1–2 working days, depending on the fabrication queue and material availability.
🚚 If it needs to be freighted, allow another 1–2 days, depending on your location and the carrier.
⏳ As a general rule, give us around a week from quote approval to have your custom ramp fabricated and ready — sometimes quicker, sometimes a little longer depending on what’s involved.
Need it sooner?
Talk to me.
I’ll always see what I can do.
Just understand that rushing a custom-built ramp can mean rushing materials, fabrication and freight — and sometimes that costs a little more.
Because when it comes to access ramps:
Fast is good.
Right is better.
📩 Email Clint@TheRampMan.NZ with a couple of photos, your measurements, and your address.
I’ll sort it.
TheRampMan.NZ
Elevating your Entrance.
Organisations We’ve Delivered Access Solutions With – Supporting New Zealand’s Disability & Accessibility Sector
🛠️ Need Custom Metal Mobility Access Ramps made in New Zealand?
Welcome to TheRampMan.NZ — custom metal access ramps built tough in Christchurch and trusted by customers across Rolleston, Auckland, Wellington, Tauranga, and even Queenstown. Perfect for all sorts of unique mobility situations.
Custom Metal Access Ramps made in New Zealand by TheRampMan.NZ — Police-vetted, precision-engineered, and built for real-world mobility.
✅ Thresholds, steps, and doorways challenging your wheelchair, powerchair, mobility scooter, or walker?
✅ Driveway dips, kerbs, or uneven paths leaving wheels scraping or causing trips?
✅ Indoor access difficulties — ramps for kitchens, hallways, or entryways?
✅ Outdoor access challenges — gardens, patios, driveways, or community paths?
✅ Need a safe, stylish ramp for your home, office, garage, car park, or community space?
✅ Looking for durable, over-engineered ramps built for daily use by all mobility devices?
✅ Mostly funded solutions available — supporting ACC, Enable NZ, and other disability funding pathways.
✅ Police-vetted, expert installation ensuring safety, reliability, and peace of mind.
✅ Driveway kerb got you stuck?
✅ Driveway dip got you scraping?
✅ Need a safe, stylish ramp for your home, business, or car park?
✅ Want a council-compliant, over-engineered solution that’s built to last?
Custom Metal Access Ramps made in New Zealand by The Ramp Man – I’ve got you covered.
🔩 Built Smart. Built Strong. Built for NZ.
At TheRampMan.NZ, we design and build Custom Metal Access Ramps made from high-grade aluminium for all situations:
🚗 Driveways – especially steep or high-kerb access in hilly places like Queenstown, Wellington, Auckland, Tauranga etc…
🦽 Wheelchair Access – for homes and businesses North or South Island…
🏕️ Caravans & RVs – perfect so you can store your precious vehicle on your property.
🏗️ Forklifts, Trailers & Utes – ramps for trades and logistics to keep loads safe, and Health & Safety compliant!
🏡 Garages & Workshops – improve access and safety, get over that drainage channel dip without nose scraping!
🛞 Road Crossings, Kerbs & Sliding Gates – no more rear scraping or stuck wheels!
♿ Mobility & Health/Safety Ramps – fully compliant, and mostly funded, we’ll have you racing around the house in no time!
🧱 Your Ramp, Your Way – Fixed or Portable – Made in Rolleston, Christchurch – NZ-Made, with DIY-Kits available!
✔️ Flat Custom Metal Access Ramps, shaped ramps, or aluminium plate styles
✔️ Permanent or temporary installs
✔️ Portable or fixed options
✔️ Heavy-duty strength, lightweight design
✔️ Anti-slip, council-compliant, and better than rubber or plastic ramps.
💪 Why TheRampMan.NZ?
Because I don’t just sell ramps — I design them to fit, over-engineer Custom Metal Access Ramps to last, and guarantee they’ll work— from my experience.
Every Custom Metal Access Ramp is made-to-measure and built right here in Rolleston, Christchurch, NZ using high-grade aluminium that won’t rust and won’t quit – perfect for NZ conditions from Northland to Southland.
🛍️ What’s Available Now?
🚨 Limited stock of KERBY™ – 4m lengths of aluminium extrusion driveway ramps – hurry while stocks last!
🆓 Free quotes – let’s get your access sorted, perfectly and fast.
🌐 Email me here with a couple of photos, some measurements and your address
👋 Get Custom Metal Access Ramps That Work!
Whether it’s for safety, mobility, vehicles, good looks or compliance – I’ll build Custom Metal Access Ramps that get the job done – any way you want.
📞 Contact me today for a free quote on 021 1144014
🏗️ The best Custom Metal Access Ramps in NZ – from Northland to Southland, Auckland to Wellington, Rolleston to Queenstown, Timaru, Dunedin and Invercargill, and everywhere in between.
🛠️ Why The Ramp Man Exists?
Why TheRampMan.NZ Had to Happen
Let’s be real.
For years, the only viable option around Selwyn and Canterbury was KERBY™.
It was an aluminium extrusion. It was readily available. It was, at the time, probably the best ramp solution available.
But from around 2020 onwards, not much really changed.
And I started getting frustrated.
Because while KERBY™ solved a lot of problems, it didn’t always eliminate that bastard bump.
Especially with lowered cars like mine.
And particularly on hills, steep driveways, circular cul-de-sacs and awkward transitions — Auckland, Wellington, Christchurch’s Port Hills and everywhere in between.
Bottoming out isn’t fun.
Neither is needing someone to give you a push in a wheelchair.
So I started thinking:
Why are we still trying to make one standard extrusion solve every driveway?
Then the requests started coming.
“Can you help with my hill driveway entrance from the road and the dip into the garage over that drainage channel?”
“My lowered car scrapes when I’m coming out.”
“Mine scrapes when I’m coming in.”
“Can you do something for mobility access?”
Then it expanded.
ATVs. Bikes. Caravans. Motorhomes. Trailers. Boats. Hoists. Forklifts. Side-lifters. Warehouses. Gate sliders. Drainage channels. Garage dips.
Even fencing and other custom fabrication ideas started appearing.
It wasn’t just cars anymore.
It was everything that was needed to get from one level to another.
And I thought:
Bugger it.
Let’s stop trying to make one product fit everything.
Let’s build proper custom ramps.
About TheRampMan.NZ
So, TheRampMan.NZ was born in early 2025.
The idea was simple:
Look at the problem first. Build the ramp second.
We’re based in Rolleston, Canterbury, and work with experienced fabrication and engineering capabilities to turn those awkward access problems into properly considered solutions.
That means custom cutting, folding, drilling, welding, reinforcing, fixing, and fabrication — depending on what the job actually needs.
And because I’m a Graphic Designer by trade, I’ve spent my career thinking about how things work, how they look, and how people interact with them.
That might sound like an odd combination for a ramp builder.
It isn’t.
Good design is about solving problems.
And that’s exactly what custom ramp design is.
We work with 5052 aluminium plate, appropriate reinforcement, specialist fixings, and increasingly, recycled-rubber components where they make sense.
We’re also conscious of material use and waste.
Offcuts don’t automatically become rubbish — they’re opportunities for the next component, reinforcement, wedge, bracket or completely different idea.
That’s how you keep a custom product genuinely custom without throwing half the sheet in the bin.
And Then There’s the Personal Bit
A few years ago, I couldn’t even walk properly because of Guillain-Barré Syndrome (GBS).
So when I talk about access, I’m not talking about something I’ve only read about.
I’ve experienced what a doorway, a lip, a step or a bloody awkward transition can feel like when your mobility changes.
That’s a big part of why TheRampMan.NZ has evolved beyond simply making wheelchair ramps, powerchair ramps, scooter-access ramps, and vehicle ramps.
I’m interested in making access easier.
For the person using it.
For the person pushing.
For the person driving.
For the operator loading equipment.
For the business, trying to make a workplace safer.
And for anyone who’s simply sick of scraping, jolting, bumping, struggling or saying:
“There has to be a better way.”
That’s where I come in.
Custom. Considered. Built Properly.
The new generation of TheRampMan.NZ systems isn’t about selling you the biggest piece of metal I can manufacture.
It’s about choosing the right combination of material, shape, reinforcement, fixing, and support for the actual job.
Sometimes that’s 8mm aluminium.
Sometimes it’s a lighter plate.
Sometimes it’s recycled rubber.
Sometimes it’s a hybrid.
Sometimes it’s a completely weird custom solution that I’ve never built before.
That’s the fun part.
Because your driveway, garage, warehouse, or access problem doesn’t need to be standard.
Neither does the ramp.
This isn’t just a business.
It’s personal.
It’s custom.
It’s considered.
It’s built with care.
And it’s designed to make life a bloody sight easier.
TheRampMan.NZ
Elevating your Entrance.
Maybe a ramp with special features like your logo on it, even powder-coated any colour you like?
🛠️ Why TheRampMan.NZ is the Go-To for all metal ramps
We save you money by laser cutting, and you get the best, most affordable ramp access solution possible!
🔩 Plus Precision Matters – That’s Why I Use a Laser Cutter
Every ramp I make is custom-cut with industrial laser precision – no guesswork, no rough edges. No more hand grinding, no more arduous, expensive labour, no more drilling multiple holes, and no more middle men!
That means:
-
Perfect fit to your driveway, gate, kerb, or vehicle.
-
Faster install, better alignment, and cleaner safe edges, holes and welds.
-
Cleaner look – no jagged cuts or messy grinders, nice rounded 30 mm radii.
-
Ultimate durability – exact specs = no weak points.
- No rust – made with high-quality 6.0 mm thick industrial-strength Aluminium.
- The Best DIY Pack – industrial-strength (not hardware store style), proprietry, purpose-driven fixings and drill bit driver, concrete drill bit, nylon plugs & more, all available as “Trade-Priced” extra (see below)!
From car ramps to forklift or wheelchair access, every detail matters – and my laser cutter gets it millimetre-perfect.
🛠️ Custom metal vehicle ramps. Laser-cut. Built to last.
📲 Contact Clint@TheRampMan.NZ and get a ramp designed with precision and passion.
📩 Need help? Email a picture or two, your measurements and your address to clint@therampman.nz and I’ll sort it.
Car Road Access Ramps – Flat or Folded for general traffic
Custom-made metal Driveway Ramps for difficult dippy driveways on hills.
Road Gutter to Entrance Ramps
Banish that annoying bump with a flat, folded metal plate! 99% Smooth!
+
Click to go to
TheRampMan’s Flat Fixed Ramps.
Forklift & Garage Roller-Door Entrances Ramps – Any Height, Any Width
Warehouse & Garage’s Concrete Cut-Outs, Lips & Entrances.
Yard ramps for Side-Lifters
No Health & Safety Risks.
And, Sump Grate covers too!
Eliminate all Health & Safety Risks for outside areas.
+
Click to go to
TheRampMan’s Flat Forklift Ramps.
Temporary Garage Entrance Ramps
for difficult dippy driveways on hills with drainage channels.
Portable Gutter Ramps
For the Boat Trailer, kids coming back to stay with lowered sport cars, Caravan access from the road.
+
Click to go to
TheRampMan’s Portable Ramps.
Temporary Road Entrance Ramps
for difficult dippy entrances into garages over drainage channels.
Portable Gutter Ramps
for Caravan access from the road.
Portable Caravan Steps
for Caravan access from the grass.
+
Click to go to
TheRampMan’s Caravan Ramps.
Wheelchair Access Ramps
for safe, smooth entry into homes, garages, shops & sheds.
Portable Mobility Ramps
ideal for walkers, scooters & wheelchairs over steps or lips.
Aluminium Flat Ramps
for concrete lips at garage doors & tricky door thresholds.
+
Click to go to
TheRampMan’s Wheelchair Ramps.
The Ramp Man's DIY Fixings Pack (CONCRETE SCREWS)
The Ramp Man’s DIY Installation Kit
TheRampMan’s DIY Fixings Pack contain one Torx Head Driver for our, 6.0 mm dimeter x +/- 50 mm or +/- 75 mm or +/- 105 mm long Countersunk CONCRETE SCREWS which will be supplied additionally with each order. Each pack has X5 Concrete Screws of one particular length suited to your situation, plus a proprietary drill bit driver, a concrete drill and more.
Great for security, these Torx six-pointed star-shaped pattern 6.0 mm diameter Countersunk (CSK), Concrete Screws are far superior to any other DIY masonry screws out there on the market like Ramset 14g (6.3 mm) Masonry Screws. These CSK Screws are 100% removable Concrete Screws (NOT masonry anchors), with superior clamping force when used close to the edge of the ramp (35 mm – 50 mm).
High corrosion resistance and perfect for use in concrete and asphalt!
These are the best of the best, and you cannot get these off the shelf at your local hardware store. They are a little bit more expensive, but they go the distance.
We also have another option if fixing on the roadside. These are slightly different but suited to both concrete and asphalt. They drive directly into the surface with a monster double thread. Same Torx head size, same diameter. I will quote what best suits your situation and supply details about it.
Easy Ramp Installation DIY
At your end, all you’ll need is a drill with a hammer function and a 5.5 mm Concrete Drill to suit your drill. Easy as!
Pop the ramp down, mark the holes with your drill bit through the ramp holes, move the ramp away and drill the concrete holes 30 mm deeper than the length of the concrete screw, blow the dust out, put the ramp back, screw the Concrete Screws in firm, and voila!
Set and forget, and get your sanity back again!
The Ramp Man's Big Hairy Questions Answered
❓ BIG QUESTIONS ABOUT RAMPS & WHERE & HOW THEY ARE INSTALLED?
Here are the FAQs from real Kiwis like you…
🏛️ Are the ramps council-compliant?
Yes, absolutely.
Unlike those dodgy rubber ramps that block water and flip up into the street (or worse, the sweeper), TheRampMan’s ramps are fully council-compliant.
No tripping hazards. No water pooling. No fines.
One road sweeper even jumped out of his truck, shook my hand and said:
“I love these. I want one for my own driveway. I’m forever kicking away loose rubber mats and bits of wood that get sucked up into my sweeper.”
✅ Real-world proof. Built to last. Council and common sense approved.
💧 Does water still flow through underneath?
Yes — and leaves too.
There’s a clear channel underneath every ramp so water can flow freely and debris won’t get stuck.
No blockages. No flooding. No stress.
🌀 Can you build a curved ramp for a cul-de-sac or corner?
You bet.
Thanks to my ridgy-didgy laser cutter, I can create precision-cut custom ramps to suit any shape — curved, angled, or tricky driveways.
Just send through a few pics and basic measurements.
Want to see a beauty in action?
Check out the 6m wide curved ramp installed at Christchurch Airport for a car hire company.
📍 11 Illinois Drive, Christchurch
It’s built to handle serious traffic — and it looks mint.
(See the top image on this site!).
🔧 Do you install the ramp too?
Yes, I sure do — across Canterbury and beyond.
For locals, I handle everything from measure-up to full install.
Outside of Christchurch? I can fly up to Auckland, Wellington, Tauranga or drive down to Timaru, Dunedin or Queenstown if needed — just allow for travel costs.
If it lines up with a weekend or a visit to mates on the North Shore or in Flat Bush, I can often work it in. Let’s have a yarn and make it happen. I am currently working on an installer for each region… watch this space.
💬 Got another question?
Flick a photo and your address to clint@TheRampMan.nz and I’ll personally reply with a solution.
Real service. Real results. Built right.
Clint's Custom Ramps are the Absolute BEST GARAGE ENTRANCE RAMPS | DRIVEWAY RAMPS | DRIVEWAY KERB RAMP | GUTTER RAMP | CURB RAMPS | PORTABLE FLAT RAMPS | FIXED FLAT RAMPS | FORKLIFT RAMPS | GATE SLIDER COVERS | CUSTOM ACCESS RAMPS | THE BEST KERB RAMP IDEAS | METAL DRIVEWAY RAMP | Kerb Ramps Bunnings | kerb Ramps Mitre 10 | Driveway Ramp nz | Better than Rubber Ramps | Better than KERBY ramp | curb ramp Bunnings | curb ramp Mitre 10 | Driveway Ramp nz | Better than Rubber Ramps | Better than KERBY ramp | Better than steel ramps
Click to zoom on a ramp installation job that takes your interest
SAMPLE FOR VIEWING: 8mm Thick Hand-Cut, CURVED, Custom Made Road-Kerb-Driveway Cut-de-Sac Driveway Ramp SAMPLE: 14 Kingsley Place, Rolleston.
Curved 8mm Custom-Made Mitred Mammoth Ramp – 14 Kingsley Place, Rolleston
Looking for a ramp that’s built to last, perfectly safe, and custom-fit for your space? Our curved 8mm Mammoth ramp at 14 Kingsley Place, Rolleston, delivers unmatched strength, precision, and style. These can be made in more economical rectangular simple styles as well.
Engineered for Strength & Safety
Crafted from 8mm thick steel, this Mammoth ramp is designed to handle cars, caravans, trucks, movers, wood trucks and trailer loads of shingle, caravans, motorhomes, forklifts, and more. The curved design isn’t just for aesthetics – it allows smooth, natural transitions over uneven ground or tight corners without compromising safety.
-
Flat & Stable: Our ramps are precision-engineered for a continuous, level surface, so every step or wheel movement feels secure.
-
Anti-Skid Surface: Built-in traction ensures you stay safe, even in wet conditions. Perfect for Rolleston’s unpredictable weather!
-
Custom-Fit Curves: Each curve is calculated for the site, allowing vehicles to glide smoothly without stress on tyres or suspension or on you and your wallet!
Perfect for Any Access Challenge
Whether you’re managing a driveway transition, side access for trailers, or boat and caravan entry, this ramp adapts seamlessly to your property. Its strength and flatness are ideal for both industrial and residential use.
Professional Installation & Durability
Our ramps are interlocked and reinforced to withstand heavy use for years to come. Installation is fast, precise, and minimally disruptive. This Mammoth ramp isn’t just a ramp – it’s a long-term solution for safety and convenience.
See the Difference
At 14 Kingsley Place, Rolleston, this custom ramp stands out for its combination of engineering excellence and functional design. The payoff? 10 meters of flawless, flat, super-strong curved ramp that makes accessing your property effortless.
📞 Ready to upgrade your access? Call us today at 0211144014 or contact me at TheRampMan.NZ to discuss your custom solution.
SAMPLE FOR VIEWING: 6mm Thick A LASER-CUT, CURVED, supported, JOINED & welded, 6m FLAT RAMP SAMPLE: 11 Illinois Drive, Christchurch Airport
Curved Laser-Cut Commercial Ramp – 11 Illinois Drive, Christchurch Airport
Need a high-strength, precision-fit ramp for commercial use at Christchurch Airport? Our older-style 6mm thick laser-cut curved ramp at 11 Illinois Drive delivers industrial-grade performance with safety and durability in every detail.
Engineered for Commercial Use
Built from 6mm thick aluminium chequered plate with laser-cut precision, this ramp is designed for high-traffic environments, including airport car rental operations. The curved design ensures smooth vehicle transitions in tight spaces while maintaining structural integrity.
-
Flat & Level Surface: Every curve and panel is engineered for consistent flatness, minimizing wear on vehicles and ensuring safe, predictable movement.
-
Anti-Skid Finish: Traction-controlled surface keeps vehicles and personnel safe, even in wet conditions common at Christchurch Airport.
-
Custom Curves for Tight Spaces: Perfect for navigating corners, ramps, or confined areas while maintaining efficiency and safety.
Built for Heavy Use
From SUVs to vans, this ramp handles frequent vehicle traffic without compromise. The interlocked and welded design ensures long-term stability, making it ideal for commercial operations where reliability is non-negotiable.
Professional Installation & Long-Term Durability
Our team ensures fast, precise installation with minimal disruption to airport operations. The result is a ramp that’s safe, strong, and ready for daily commercial use.
Experience the Difference
At 11 Illinois Drive, Christchurch Airport, this custom ramp combines engineering precision with practical design, providing a smooth, safe, and reliable solution for vehicle access.
📞 Upgrade your access today! Call us today at 0211144014 or contact me at Clint@TheRampMan.NZ to discuss your custom solution.
Real-World Problem Solvers — Any Surface, Any Vehicle
Got dips, scrapes, or tricky transitions in front of garages, driveways, or roadside access? From ATVs to golf carts, ramps, and sheds, we tackle the awkward, unsafe spots other solutions ignore.
See the Issues, See the Fixes
Our image strip shows exactly what we solve — dips, bumps, and uneven surfaces marked up with sketches and overlays so you can see the problem and the solution in one glance. Every scenario gets our precision engineering treatment.
Custom Solutions for Every Situation
Whether it’s tight corners, uneven driveways, or heavy-use access points, each ramp is designed and fabricated to fit your space perfectly. Flat, level, anti-skid surfaces ensure safety and reliability for all types of vehicles.
From Concept to Installation
We don’t just show the problem — we deliver the solution. From consultation and design sketches to professional installation, every ramp is engineered to last and built for daily use.
📞 Upgrade your access today! Call us today at 0211144014 or contact me at Clint@TheRampMan.NZ to discuss your custom solution.
NEW RAMP PRODUCT ALERTS!
SEMI-MOUNTABLE KERBS?
SPECIFICALLY DESIGNED FOR SELWYN'S SUCKY Semi-Height GUTTER KERBS!
Smooth Rides, Smarter Spend – A Must for Every Selwyn Driveway!
The KERBY Evolution is here!
Non-Mountable Kerbs?
No Problem – Built for Full-Height Gutters, Ready for Builders, Tradies & Section Owners!
Smooth Rides, Smarter Spend – A Must for Every Christchurch Driveway!
The Selwyn Semi-Height & Christchurch Full-Height Roadside Kerb Ramps– Selwyn's Smoooooothest Ramps!
The Ultimate Ramp Access Solution for Selwyn’s Sh#t Driveway Bumps and Christchurch’s C#nty Kerb Mountains!
Ever Wondered if There Was Something Even Better Than KERBY™? This is It.
Welcome to the next evolution in driveway access: the Selwyn Semi-Height Ramp. Precision engineered, ultra-smooth, folded flat top for excellent, strong mounting and strength, and built to outlast every driveway drama Selwyn can throw at it.
Tired of flappy tin ramps, the whimpy West Melton folded metal ramps, the rusty old saggy steel DIY jobs, ye ol’ flag poles, the random rubber ramps that the road sweeper eats for breakfast, or the sad old four by two back yard job, but mainly, done with your car scraping on the way in or out, this is your forever fix.
If you live in Rolleston, Lincoln, Prebbleton, West Melton, Kirwee, Leeston, Tai Tapu, Burnham, Templeton, Springston, Dunsandel, or Southbridge and you’ve been dealing with a dodgy ramp or no ramp at all, it’s time to upgrade to the next level.
The Ramp Evolution is here: From Scraaaape & Bang-Bang to 99% Smooth Transitional Luxury
You’ve seen the old-school ramps — thin, folded metal that fail, rust and sag, fixed with whatever bolts someone had in their ute tray. They rust, they sag, they rattle, they trap water, they build gardens, and eventually they pancake. No, no, no! Perish the thought.
Then came KERBY™. A revolution in council-compliant, super heavy-duty, 6mm aluminium extrusion ramps. Built in Selwyn. Installed properly. Loved by thousands.
Now? We go next level.
Bye-Bye Bang-Bang & Wallet-Pain, Hello Smooth Sailing & Sanity on Every Drive!
Trusted Partners & Funding Support Networks
